Every fixed outdoor structure makes a permanent decision about light and airflow. A solid roof solves the rain problem and the sun problem, but it also solves the fresh-air problem and the open-sky problem — permanently, in all weather. An open lattice pergola provides partial shade at certain sun angles and zero rain protection. Neither one adapts to what the space actually needs at a given moment.
The JHR Motorized Louvered Aluminum Pergola has a roof that rotates. The blades sit on pivot axes driven by a quiet tubular motor — 0 degrees puts the blades edge-on to the sky for full light and maximum ventilation; 135 degrees overlaps the blades and the roof is watertight, with rain draining to integrated gutter channels in the perimeter beams. Any position between those two handles a different combination of shade, light, and airflow. The adjustment takes a few seconds from a wall switch, a remote handset, or a smartphone app.
The entire structure is 6063-T5 aluminum alloy — columns, beams, and louver blades — powder-coated in any RAL color. Column spacing, roof span, and height are specified per project. Accessories include integrated LED lighting, motorized side screens, rain sensors for automatic louver closure, and smart home integration through Tuya, Alexa, and Google Home. Standard modular widths from 3.0 m to 8.0 m; depths from 2.5 m to 6.0 m; column heights from 2.4 m to 3.5 m.
Deploy Fast. Store Small. Move with Ease.
The JHR Manual Retractable Barricade lets one person deploy, reposition, and connect crowd-control sections with ease. Its accordion-folding design provides 2–10 m coverage while taking minimal storage space.
The problem with a terrace or a shopfront that faces the wrong direction isn't that it's unusable — it's that it's unusable at exactly the hours when it should be most useful. The mid-morning sun that turns a patio table into a heat trap. The afternoon rainstorm that empties a restaurant terrace in ninety seconds. Both problems have the same practical cost: space that should be generating revenue or enjoyment isn't.
A glass canopy solves the rain problem but traps heat and costs a construction project to install. A parasol covers one table in no wind. The JHR Aluminum Awning covers the space properly — 1.5 m to 6.0 m of projection, 1.0 m to 12.0 m wide, retractable when the weather is good and extended when it isn't.
The frame is 6063-T5 aluminum alloy — the same material decision that drives everything else in the JHR outdoor product range. It doesn't rust, doesn't need repainting, handles salt air and high-humidity conditions without structural degradation. The canopy fabric is solution-dyed acrylic or high-density polyester outdoor textile, waterproof-coated on the reverse, UV-resistant through the fiber rather than a surface treatment. Both materials do their job without maintenance intervention for years at a stretch.
Retractable models fold back against the wall on a motorized or manual roller. Fixed models provide permanent coverage at a lower hardware cost. Both configurations ship with a hardware kit and installation drawings for straightforward on-site assembly by any construction team.
Most people don't think seriously about a carport until something happens to the car. The paint on the roof starts going chalky after three summers of direct UV. The rubber around the windscreen gets brittle and starts to lift at the corners. Door seals that were perfectly fine at purchase start leaking around year four. None of it is dramatic damage — it's the slow kind, which is why it goes unnoticed until the car is being traded in and the depreciation shows up in the offered price.
A full garage is the complete answer, but it's a building project: planning permission, a foundation pour, a construction crew, and a cost that rarely makes sense for a second vehicle or a parking bay that didn't come with the property. A carport sits between those two options and handles the actual problem — UV, heat, and rain — at a fraction of the cost and without any of the planning complexity.
The JHR Aluminum Carport is built on a 6063-T5 aluminum alloy frame with cast acrylic roof panels. The frame doesn't rust — not at the column bases, not at the bolt joints, not after ten years of rain sitting on every horizontal surface. The cast acrylic panels let daylight through while blocking up to 99% of UV, so vehicles parked underneath stay in natural light rather than in a dark covered space, and the UV that degrades paint and rubber doesn't reach them. The structure assembles from pre-cut, pre-drilled profiles using standard hand tools — no welding, no specialist equipment, no concrete formwork beyond the column footings.
Single-bay, double-bay, and multi-bay configurations. Custom bay width, depth, and column height. Any RAL color on the frame. Integrated perimeter gutters and concealed downpipes handle rain without surface-mounted pipework.
Every fixed outdoor structure makes a permanent decision about light and airflow. A solid roof solves the rain problem and the sun problem, but it also solves the fresh-air problem and the open-sky problem — permanently, in all weather. An open lattice pergola provides partial shade at certain sun angles and zero rain protection. Neither one adapts to what the space actually needs at a given moment.
The JHR Motorized Louvered Aluminum Pergola has a roof that rotates. The blades sit on pivot axes driven by a quiet tubular motor — 0 degrees puts the blades edge-on to the sky for full light and maximum ventilation; 135 degrees overlaps the blades and the roof is watertight, with rain draining to integrated gutter channels in the perimeter beams. Any position between those two handles a different combination of shade, light, and airflow. The adjustment takes a few seconds from a wall switch, a remote handset, or a smartphone app.
The entire structure is 6063-T5 aluminum alloy — columns, beams, and louver blades — powder-coated in any RAL color. Column spacing, roof span, and height are specified per project. Accessories include integrated LED lighting, motorized side screens, rain sensors for automatic louver closure, and smart home integration through Tuya, Alexa, and Google Home. Standard modular widths from 3.0 m to 8.0 m; depths from 2.5 m to 6.0 m; column heights from 2.4 m to 3.5 m.
Aluminum offers the perfect balance of strength, lightweight properties, and corrosion resistance. Unlike steel, aluminum never rusts—eliminating the need for regular painting or galvanizing. Unlike wood, aluminum won't rot, warp, crack, or suffer from insect damage. With a premium powder-coated finish, aluminum gates require only occasional cleaning with soap and water, making them virtually maintenance-free for decades .
JHR uses high-grade aluminum profiles with structural thicknesses ranging from 2.0mm to 3.0mm depending on the gate type and application. All structural components meet or exceed industry standards for residential and commercial applications.
Yes. Aluminum naturally resists saltwater corrosion, making it ideal for coastal installations. For added protection in marine environments, we offer Qualicoat Seaside certification powder coating—a super-durable finish specifically formulated to withstand harsh coastal conditions .
Our standard color RAL 9011 Graphite Balck and RAL 7012 Basalt Grey.We also offer the full RAL color palette with multiple finish options including matte, gloss, super-matt, and textured finishes. Wood grain finishes that replicate the natural beauty of timber are also available, giving you the aesthetic of wood without the maintenance headaches .
Absolutely. Aluminum is 100% recyclable without any loss of quality, making it one of the most sustainable building materials available. When you choose JHR aluminum gates, you are selecting a product that can be recycled indefinitely at the end of its long service life .
With proper maintenance—primarily regular cleaning with mild soap and water—our aluminum gates typically last 20 to 30 years or more. The powder-coated finish protects against fading and corrosion, while the aluminum substrate never rusts or deteriorates .
For a single pedestrian gate, the opening width between your posts or walls should be approximately 30mm wider than the physical width of the gate. This clearance ensures smooth operation without binding. Measure at ground level and again at the top, as posts may not be perfectly parallel . Contact JHR team, we will provide a measurement instruction manual.
Measure the clear opening width between your brick pillars or support posts. The total physical width of your double gates should be 30mm to 60mm less than this measurement to allow proper clearance for hinges and operation. Always take measurements at multiple heights to account for any slope or unevenness .Contact JHR team, we will provide a measurement instruction manual.
Yes. JHR specializes in custom-sized gates to fit any opening. While some design variations have preset height limitations, we offer made-to-measure widths for virtually all our gate styles. Contact our sales team with your specific dimensions for a quotation .
Slopes require careful consideration. For swing gates, verify that the driveway surface does not rise where the gate swings inward—the gate could strike the ground during opening. For sliding and cantilever gates, slopes are less problematic as the gate moves laterally. We recommend providing slope measurements and photos for our technical team to advise on the best solution .
Yes, provided your existing posts are structurally sound and appropriately sized for the gate weight and wind load. Posts must be vertically plumb and securely anchored in concrete. For optimal results, we recommend using JHR aluminum posts designed specifically for our gate systems .
Yes. All JHR gates are supplied complete with all necessary hardware including hinges, latches, lock sets, and keys. Double gates also include drop bolts. Our fittings are manufactured from stainless steel or galvanized materials to prevent corrosion and ensure long-term reliability .
Our aluminum posts feature base plates that can be secured to existing concrete surfaces using appropriate mechanical anchors, or they can be set into concrete foundations for new installations. For maximum stability, we recommend concreting posts at least 600mm deep .
Floor-mounted hinges are required when installing gates on aluminum posts. Due to the hollow profile of aluminum posts, accessing the bolts for standard wall-mounted bottom hinges is impossible. Floor-mounted hinges provide secure anchoring and are included with our aluminum post systems .
For experienced DIYers with basic tools, single pedestrian gates can typically be installed in 30-60 minutes. Double driveway gates and automated systems require more expertise. We provide detailed installation instructions with every order and recommend professional installation for complex projects or automated gates .
Yes. All our swing and sliding gates are designed and reinforced specifically for automation. The lightweight yet strong aluminum construction reduces stress on motors and hardware, extending the life of your automation system .
We offer a complete range of automation solutions including swing gate operators (for double and single swing gates), sliding gate motors (for tracked and cantilever gates), telescopic gate drives, and retractable gate automation. All systems include remote control, and smart options integrate with WiFi, smartphone apps, and home automation platforms.
Yes, JHR supplies complete automation kits including motors, control boards, remote controls, safety photocells, and flashing lights. For safety and compliance reasons, we recommend professional installation for all automated gate systems.
All JHR automated gate systems include safety photocells (infrared beams) that detect obstacles and reverse gate movement. Additional safety features include emergency stop buttons, anti-crush protection, and compliance with international safety standards including Gate Safe recommendations .
Aluminum weighs approximately one-third as much as steel for equivalent strength. This weight reduction means you can use smaller, more affordable automation motors, and your automation system will experience less wear over time, extending its operational life .
Simply wash with mild soap and warm water using a soft cloth or sponge every few months. Rinse thoroughly with clean water. Avoid pressure washers, abrasive cleaners, and harsh chemicals that could damage the powder-coated finish .
For manual gates, lubricate hinges and locks every 6 months or when squeaking appears. For high-traffic or automated gates, lubricate every 3 months. Use silicone-based spray lubricants or WD-40 Specialist—avoid heavy greases that attract dirt and debris .
First, check that hinge screws are tight. If sagging persists, adjust hinge alignment by slightly lifting the gate while tightening screws. For severe sagging, install an adjustable anti-sag kit or check if posts have shifted. Aluminum gates rarely sag if properly installed, but ground settlement can affect post alignment .
Lightly sand the scratched area with fine-grit sandpaper, clean thoroughly, then apply matching touch-up paint (available from JHR). Apply in thin layers, allowing each coat to dry. Finish with a clear protective sealant for maximum durability .
No. Unlike wood gates that need staining or sealing every 1-2 years, or steel gates that require repainting when rust appears, powder-coated aluminum gates never need repainting. The factory-applied powder coating is baked on for permanent adhesion and durability .
Yes. JHR aluminum gates feature multi-point locking systems, reinforced frames, and anti-lift designs that provide excellent security. The material is strong enough to resist forced entry while being lightweight for smooth operation. For automated gates, integrated safety systems prevent unauthorized access .
Absolutely. Our gates include finger-safe hinge designs and optional anti-climb features. For automated systems, safety photocells and obstruction detection ensure the gate stops and reverses if anything enters its path, protecting children and pets from injury .
JHR gates include gravity latches and optional hydraulic closers that keep gates securely closed. For exposed locations, we recommend open-slat or picket designs rather than solid board gates to reduce wind loading. Our cantilever and sliding gates are inherently wind-resistant as they move laterally rather than swinging .
JHR offers a comprehensive warranty covering manufacturing defects. Aluminum structures are warranted against corrosion and material defects for up to 10 years depending on the product line. Automation components carry standard manufacturer warranties. Contact our team for specific warranty terms for your project.
JHR manufactures and supplies gates on a global basis. For local projects, we can recommend certified installation partners in your area. International customers receive detailed installation manuals and technical support via phone, email, and video consultation to ensure successful installation anywhere in the world .
CONTACT US
Do you want a warm and cozy courtyard with an automatic gate and matchingfence? This will not only protect your privacy but also provide convenience andsecurity for your life.
If you have any needs regarding gates and fences, please contact us promptly.We will be happy to assist you.
